How to Reset Your Kwikset SmartCode Locks

If you have a Kwikset Smart Code lock, you may find that at some point you need to reset it. This can be due to a number of reasons, such as forgetting your code or having the battery run out. In this blog post, we will walk you through the process of how to reset your Kwikset Smart Code locks.

What are Kwikset Smart Code Locks

Kwikset SmartCode locks are a type of keyless entry door lock that uses codes instead of a key to unlock the door. The code can be entered on the keypad on the lock itself or through a mobile app. To reset the code on a Kwikset SmartCode lock, you will need to first open the door with the existing code. Then, press and hold the C button on the keypad for five seconds until the light flashes. Enter your new four-digit code and press Enter. The light will stay on for five seconds to indicate that the code has been accepted.

How to Reset Your Kwikset Smart Code Locks

  • Ensure the door with the Kwikset 888 SmartCode deadbolt with Z-Wave or 913/914 SmartCode is open and accessible.
  • Remove the cover of the lock by unscrewing it with a Phillips head screwdriver.
  • Locate the battery cover on the back of the lock and remove it.
  • Remove the old batteries and insert fresh ones into the lock, making sure to orient them in the correct direction.
  • Close the battery cover and screw it in place.
  • Reattach the cover of the lock by reversing step 2.
  • Hold down the Schlage button on the keypad for 5 seconds until all of the lights flash green.
  • 8. The lock is now reset and you can re-enter your passcode.

Common Problems with Kwikset Smart Code Locks and How to Fix Them

  • Problem: You’ve just installed your Kwikset SmartCode lock and after following the installation instructions, you realize that it’s not working properly.
  • Agitate: Frustration sets in as you try to troubleshoot the problem and figure out how to fix it.
  • Solution: We’re here to help. In this article, we’ll walk you through some of the most common problems with Kwikset SmartCode locks and how to fix them.

Benefits of Kwikset Smart Code Locks

Standard benefits:

  • A lock is easy to install and use.
  • Can be operated from your smartphone.
  • Has a keyless entry system.

Emotional benefits:

  • Feel safe and secure knowing that your home is protected by a smart lock.
  • Have peace of mind knowing you can remotely lock and unlock your door from anywhere.
  • Enjoy the convenience of not having to worry about carrying or losing keys.

How to Change the Codes on Your Kwikset Smart Code Lock

  • Open your Kwikset SmartCode lock by turning the key or pushing the button on the wall unit, depending on your lock model.
  • Hold down the programming button on the side of the lock and turn the key or push the button on the wall unit to enter programming mode.
  • Release the programming button and enter your current 4-digit code.
  • Press the programming button again and type in your new 4-digit code.
  • Confirm your new code by entering it again.
  • Exit programming mode by turning the key or pushing the button on the wall unit, depending on your lock model.

Additional Features of Kwikset Smart Code Locks

If you are experiencing problems with your Kwikset Smart Code lock, such as not being able to open it using the keypad, you may need to reset the lock. To do this, follow these steps:

  • Ensure the door with the Kwikset 888 SmartCode deadbolt with Z-Wave or 913/914 SmartCode is open and accessible.
  • Press and hold the Schlage button on the back of the lock for 10 seconds until the light flashes blue.
  • Enter your 6-digit master code. The light will turn green.
  • Press the Schlage button again and release it. The light will turn off.
  • Test the lock by entering your code to unlock it.

Final Thoughts

While the instructions above seem daunting, if you follow them closely, you should be able to reset your Kwikset Smart Code lock without any trouble. If you run into any issues or have any questions, feel free to reach out to us for help. We hope that this article was helpful and that you are now able to successfully reset your Kwikset Smart Code locks.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *